Vape Pod Systems for Beginners

Vape Pod Systems for Beginners

Vapes have come a long way since the early days of nothing but cig-a-likes and vape pens. Now, when we think of vapers, we often picture people with massive vape box mods, blowing huge clouds on a device so complex-looking, you’d need R2-D2 to help you navigate it.

But nothing could be further from the truth. Big, complicated vape kits make up only one niche of the vaping community. Beginners have an array of options, but the newest – and arguably best – is the vape pod systems. We will help you with best vape for beginners and vaping tips for beginners.

Not only are vape pod starter kits convenient, but they’re arguably the easiest to use. Furthermore, they can carry more nicotine than conventional e-liquids, making them ideal for heavy smokers looking to quit.

That being said, they’re still quite a sharp turn from a simple cigarette and lighter. If you’re still a bit confused, not to worry. We’ll show you just how easy it is and how to vape pods. Keep in mind that there are hundreds of vape products out there, so this guide can’t address them all. However, the premise is still there and applies to virtually all pod devices.

Before You Buy Vape Pod System

  1. Choose Your Pod Device

    This may seem pretty obvious, but shopping around as a new user (or one with no pod vape experience) can get pretty confusing.

    If you want something simple, look for devices that use disposable pods and are activated by inhalation. They can’t get much simpler than that. JUUL Starter Kit is an excellent example of this type of pod device.

    JUUL Starter Kit
  2. Choose Your Nicotine Level

    This is where a lot of people set themselves up for failure. Different e-liquids have different nicotine strengths. Too little won’t give you the hit you need to fight cravings, while too much will be harsh and possibly cause some unpleasant symptoms.

    Nicotine content is measured in milligrams (mg). Conventional "freebase" e-liquids start at 0mg and typically cap out at 24mg. Nicotine salts (nic salts) can hit as high as 50mg. If you’re not sure where you fall in the spectrum, use the following as a guide:

    • 0mg - Non-smoker
    • 3mg to 6mg - Light smoker (less than 10 cigarettes per day)
    • 6mg to 12mg - Moderate smoker (up to 20 cigarettes per day)
    • 12mg to 24 mg - Heavy smoker (up to 30 cigarettes per day)
    • Over 24mg (nic salts) - Very heavy smoker (30 or more cigarettes per day)

    It's always a good idea to have two levels available, in case one proves to be too much or not enough. For instance, if you’re a moderate smoker, have a 6mg and a 12mg handy to see which one works best. If it still isn’t enough, increase as needed.

  3. Determine Your E-liquid Type

    At this point, you have to choose between to types of e-liquids. There are standard "freebase" juices or the new nicotine salts.

    Freebase is the most common, but it can’t go beyond 24mg of nicotine without setting your lungs on fire. Nicotine salts, on the other hand, use a different chemical composition to make them smoother and allow for much larger levels of nicotine.

    If you're a really heavy smoker, then it's probably a good idea to choose a vape meant for nic salts. Research carefully. Some pod systems are compatible with one type of liquid, while others work with both.

    Users also report that nic salts offer a more authentic experience, providing that familiar "throat hit" that cigarettes create.

  4. Determine Your E-liquid Type

    This is pretty straightforward. The flavor will have no bearing on the functional aspect of the vape. Just pick a few that suit your tastes.

Setting Up Your Vape Pod System

Now that you have your e-liquid picked out and ready, it's time to get set up. Fortunately, vape pod devices make this relatively easy.

  1. Charge the Vape Pod Device

    USB chargers appear to be the gold standard these days when it comes to vape systems. While the product may already have some power, it's a good idea to fully charge the device - basically Electronics 101.

    Just plug it into a computer or wall adapter. The batteries in these devices are pretty small, so charging will take no time.

  2. Fill the Pod (if Applicable)

    If you're using a disposable pod system, go ahead and skip this step. However, if your device is refillable, simply remove the stopper or cap, inject the e-liquid and close the seal.

    Important: When placing new e-liquid into the pod, make sure to leave it sitting for about 10 minutes. This is called “priming,” and it allows the synthetic fiber or (occasionally) cotton in the coil to absorb the e-liquid. If you don’t prime, you could end up burning - and permanently ruining - the pod coil.

  3. Fill the Pod (if Applicable)

    Again, designs vary from one device to another, but disposable pod devices are typically long and rectangular, with the cartridge being inserted into the bottom.

    Reusable/refillable pods may or may not follow the same formula. In many cases, they are top-loading and the vapes they work with are bulkier (but still very portable).

    Gently push the pod into the assigned area until you hear or feel it snap into place.

    Suorin Air Pods

Using Your Vape Pod

If you've overcome the first two major challenges, then the final stretch will be super easy. This is the fun part - the moment of truth when you get to take your device for a spin.

  1. Turn on the Device

    Basic pod devices don’t have power buttons. All you have to do is inhale to get the pod mod to work.

    But if yours needs to be turned on, the standard formula is to click the "Power" button five times in quick succession. Check the manual, just in case the mechanism is different. Once your device is turned on, you’re ready to go.

  2. Start with Short Breaths

    As we mentioned earlier, reusable pod devices have coils that need to soak up the e-liquid. Even after they've had time to prime, it's always a good idea to "break in" the coil. It helps you check if the coil is properly saturated, and also extends its lifespan.

    Even if you have pre-filled pods where priming isn't an issue, it's a good idea not to give the built-in coil a full blast right away.

  3. Start with Short Breaths

    This is kind of obvious, but believe it or not, there are different ways to inhale. Specifically, you have mouth-to-lung (MTL) and direct-to-lung (DTL).

    Mouth-to-lung is the preferred method for new vapers. It involves keeping the vapor in your mouth for a moment before breathing it in. It's a lot smoother than inhaling directly and also happens to be the method used by most cigarette smokers.

    Direct-to-lung is a method where vapers bypass the mouth altogether. They inhale as if it's just a breath of fresh air. While this can often provide a stronger "hit," it's also quite harsh. If you're new, your best bet is to avoid doing this until your lungs are more comfortable with the vape.


As you can see, vaping takes a little bit of skill, but it's not rocket science. The basic premise is simple - insert the pod, vape away. For most people best vape for beginners would be pod devices.

Just remember that vaping isn't an exact science. It might take a few tries to find the right nicotine level, flavor or device that suits your needs. Whatever you do, don't give up. Anything is better than the chemically-laden death twigs sold by Big Tobacco.

If you still need help, just ask your local vape store. They're more than happy to share their experience, show you the ropes and help you on your journey to become smoke-free.

Previous article Understanding E-Liquids and Vape Juice for Pod Systems